By Adam Lambert, founder of Deal Run · Updated October 30, 2026

Tub-to-Shower Conversion Cost: What to Put in Your Repair Estimate

A tub-to-shower conversion typically costs $2,000 to $12,000, according to This Old House, though curbless showers and add-ons can push it higher. Where you land in that range depends on the shower type you build and on the plumbing, valve and removal work around it. On a deal, treat it as one line in the repair estimate, and keep one tub in the house if you plan a retail sale.

Cost by shower type

Shower typeTypical cost
Prefabricated shower stall$2,000–$6,000
Walk-in shower$5,000–$12,000
Tile shower$6,000–$12,000
Curbless shower$8,000–$15,000

Prefabricated stalls use molded acrylic or fiberglass wall panels, which is why they sit at the bottom. Most professional conversions take three to seven days, and custom tile or curbless showers can take a week or longer.

Add-ons that move the number

  • Tub removal and haul-away: $300–$1,200.
  • Moving the drain line: $900–$1,100.
  • Installing or upgrading the shower valve: $700–$1,200.
  • Adding or relocating supply lines: $700 or more. With several plumbing changes, plumbing alone can pass $2,000.
  • Glass: framed doors $400–$1,200, frameless doors $1,200–$3,000, custom enclosures start around $3,000.
  • Subfloor: minor repairs may add several hundred dollars; more extensive reinforcement can add $1,000 or more.
  • Accessibility: a fold-down shower seat runs $300–$800, and grab bars $150–$500 each, installed.

In This Old House's January 2026 survey of 1,000 U.S. homeowners, 70% named materials (tile, fixtures, glass) as their top expense and 51% named labor.

If you're pricing a prefab install line by line, Homewyse's May 2026 national averages for single line items: installing a shower base is $773–$1,303 per basin, and installing a shower enclosure is $888–$1,286 per enclosure. Those figures assume basic mid-range work in readily serviceable conditions, exclude permit and inspection fees, and Homewyse says to add 13% to 22% if a general contractor supervises.

Why the valve and layout get swapped

Under the 2021 International Residential Code, as adopted in Utah, a shower compartment needs at least 900 square inches of interior area and at least 30 inches in its smallest dimension. The same section requires shower and tub/shower valves to be balanced-pressure, thermostatic or combination valves (ASSE 1016) that limit the maximum setting to 120°F, which is why the valve is often replaced when a tub becomes a shower. Your jurisdiction's adopted code is what applies, so check it before you bid. Many towns also require a permit for plumbing changes; fees vary, so get the number from your local building department.

Worked example: flip vs. rental

Illustrative, using national This Old House ranges. Local bids decide the real number.

Assumptions: a 3-bed, 2-bath flip with a tub/shower combo in each bath. You convert the primary-bath tub to a tile shower and keep the hall-bath tub. The drain must move and the valve gets replaced; supply lines stay. The framed glass door is priced separately, assuming the tile-shower bid doesn't already include glass. Excluded: permit fee, subfloor repair (unknown until the tub is out), and contingency.

Line itemLowHigh
Tile shower$6,000$12,000
Move drain line$900$1,100
Replace shower valve$700$1,200
Framed glass door$400$1,200
Flip total (primary bath)$8,000$15,500
Rental comparison: prefab stall ($2,000–$6,000) + valve replaced ($700–$1,200), drain left in place, no glass door (curtain rod)$2,700$7,200

So the flip's tile conversion is about $8,000 to $15,500 before the permit and any subfloor repair, and a prefab rental conversion with the drain left in place is about $2,700 to $7,200. Put the figure in the repair estimate before you set the max offer.

Flip or rental: when to do it

If the exit is a retail sale, This Old House advises keeping at least one bathtub elsewhere in the house, and notes walk-in showers are often seen as desirable, though resale impact varies by market. That is the logic behind the example: convert the primary bath, leave the hall tub. For a rental, a prefab stall with the drain left in place brings it down to about $2,700–$7,200. Most of the savings is the shower itself (prefab instead of tile); skipping the drain move and the glass door saves another $1,300–$2,300.

FAQ

How much does a tub-to-shower conversion cost?

This Old House puts it at $2,000 to $12,000. By type: prefabricated stall $2,000–$6,000, walk-in $5,000–$12,000, tile $6,000–$12,000, curbless $8,000–$15,000.

How long does a tub-to-shower conversion take?

Most professional conversions take three to seven days. Custom tile or curbless showers can take a week or longer.

Does a tub-to-shower conversion need a permit?

Many towns require a permit for plumbing changes. Fees vary by location; get the number from your local building department. Homewyse's line-item figures exclude permit and inspection fees.

Should I remove the only tub in a house I plan to sell?

This Old House advises keeping at least one bathtub elsewhere in the house if you plan to sell soon. It adds that walk-in showers are often seen as desirable, though resale impact varies by market.

Doing this in Deal Run

Deal Run is our product. Its AI repair estimate is built from the property's photos, so a bath that needs a tub-to-shower conversion shows up in the repair number. That number feeds the max offer for a flip, rental or wholesale exit, next to sold and rental comps and ARV. Once the numbers work, sell the deal: a deal page with photos, numbers and an offer form, a ranked list of local landlords and flippers who recently bought nearby, skip-traced contacts, and an email and text blast to your buyer list (emails from your own Gmail, texts from your own number). Run any call or text list through a DNC scrub first. Analyze is $29/mo; Analyze + Sell is $99/mo. Or pay per deal: $2 to analyze, $20 with 100 buyers. See the repairs feature or the rehab cost estimator.

Sources

Related

Price the bath before you make the offer

Drop in an address, get a photo-based repair estimate and max offer, then email and text blast the buyers who fit the deal.

Try the free demo