Lot coverage: how much of the lot a building can cover
Lot coverage is the share of a lot covered by buildings when you look straight down at it. New York City's Zoning Resolution (§ 12-10) defines it as the part of a zoning lot that, viewed directly from above, would be covered by a building or any part of a building. Zoning then caps it as a percentage, which limits how big a house, addition or ADU can be on a given lot.
A real single-family limit: Dallas R-7.5(A)
Dallas's R-7.5(A) single-family district caps lot coverage at 45% for residential structures and 25% for nonresidential structures. Above-ground parking structures count toward lot coverage; surface parking lots and underground parking do not. The same district sets a 7,500 square foot minimum lot area for residential use, a 25-foot minimum front yard, 5-foot side and rear yards for single-family structures, a 30-foot height limit, and no maximum floor area ratio. The city notes these are general guidelines with exceptions, and points to Dallas Development Code § 51A-4.100 for specifics. Limits vary by city and district, so treat any one city's number as an example of the method.
Worked example: how much room is left for an addition
A flipper wants to add square footage to a house on a lot at the district minimum. Figures are assumed for illustration, and the garage is treated as attached and counted as part of the residential structure.
| Assumption | Value |
|---|---|
| Zoning | Dallas R-7.5(A) |
| Lot size | 7,500 sq ft |
| Existing house footprint | 1,400 sq ft |
| Attached garage footprint | 400 sq ft |
| Planned addition footprint | 600 sq ft |
- Maximum coverage: 45% x 7,500 = 3,375 sq ft.
- Existing coverage: 1,400 + 400 = 1,800 sq ft, which is 24% of the lot.
- Room left: 3,375 - 1,800 = 1,575 sq ft.
- After the 600 sq ft addition: 2,400 sq ft, or 32% of the lot, under the 45% cap.
- The largest single-story footprint that fits is 1,575 sq ft more, before setbacks, height and any deed restrictions are checked.
The 600 sq ft addition fits (32% against a 45% cap) with 975 sq ft of coverage still unused. The 25-foot front yard, 5-foot side and rear yards and the 30-foot height limit still have to be checked; see setback requirements.
Why it matters on a deal
For flippers adding square footage and builders buying teardown or infill lots, lot coverage sets the maximum footprint, which limits the after-repair value you can underwrite. Check it next to building permits, a possible variance, and highest and best use. A wholesaler marketing a lot or an add-on opportunity should give buyers the zoning district and the cap, and let the buyer verify with the city.
Doing this in Deal Run
Deal Run is our product. Once you know what the lot allows, it handles the rest of the analysis: MLS-grade comps for ARV, an AI repair estimate from the property's photos, and Max Offer for flip, rental and wholesale exits. The repair estimates page shows how the photo estimate works.
Frequently asked questions
What is lot coverage?
The part of a lot that, viewed directly from above, is covered by a building or any part of a building, per New York City's Zoning Resolution definition.
What is the lot coverage limit in Dallas R-7.5(A)?
45% for residential structures and 25% for nonresidential structures, according to the City of Dallas planning page for the district.
Does parking count toward lot coverage?
In Dallas, above-ground parking structures count; surface parking lots and underground parking do not.
Is lot coverage the only limit on an addition?
No. R-7.5(A) also sets a 25-foot front yard, 5-foot side and rear yards for single-family structures and a 30-foot height limit, and deed restrictions can apply too.
Sources
- New York City Zoning Resolution § 12-10, Definitions (NYC Department of City Planning), checked October 30, 2026
- City of Dallas Planning, R-7.5(A) Single Family District yard, lot and space regulations, checked October 30, 2026